Columns in Word: How to Create a Newsletter Layout
By Guccibase · · 8 min read

To create a newsletter layout in Word, type or paste your content first, select the body text, then choose Layout > Columns > Two (or Three). Word puts continuous section breaks around the selection, so your title stays full width while the articles flow in columns. This guide covers the full layout: masthead, columns, column breaks, even column ends, a dividing line and the checks to make before you share or print.
Key Takeaways
- Columns live in Layout > Columns. Choose More Columns for custom widths, spacing and a line between.
- Select the body text before you apply columns, and Word adds the continuous section breaks for you. The masthead stays full width.
- Use a column break (Layout > Breaks > Column) to start a new column on purpose. Do not press Enter repeatedly.
- A continuous section break after the last paragraph evens up the column ends.
- Keep real headings and alt text. Columns change the look, not the reading order.
How columns work in Word
Columns in Word are a page layout setting, like margins or orientation, and they belong to a section. Text flows down the first column, then continues at the top of the next. When a column is full, the text moves on by itself.
That is why section breaks matter. Microsoft's guide to creating newsletter columns notes that when a document has more than one section, a new column layout applies only to the current section. A typical newsletter therefore has two sections on the first page:
- A one-column section for the masthead: the newsletter name, issue date and perhaps a short introduction.
- A two- or three-column section for the articles.
A continuous section break separates them without starting a new page. If section breaks are new to you, the guide to section breaks in Word explains them, and the lesson on columns with continuous sections shows the exact pattern used here.
Before you start: content first, layout second
Columns are easiest to set when the text is already in place. Before you touch the layout:
- Turn on formatting marks with Home > Show/Hide ¶, or press Ctrl+Shift+8. You will see section breaks and column breaks as labelled lines.
- Use heading styles for article titles (Heading 1 or Heading 2) and Normal for body text. Styles keep every article consistent, and screen readers use headings to move around. The styles guide explains why.
- Remove empty paragraphs used for spacing. In narrow columns they create odd gaps. Use paragraph spacing instead, as the paragraph spacing lesson shows.
If you pasted the articles from email or the web, clean them up first: paste as plain text and reapply your styles.
The steps below use a simple example: a one-page newsletter called Riverside Team News, with a masthead and three short articles ("New starters", "Office move" and "Dates for your diary").
Step 1: Set up the masthead
- Type the newsletter name (for example, Riverside Team News) on the first line and apply the Title style (Home > Styles > Title).
- On the next lines, add the issue date and a one-line description, in Normal or Subtitle.
- Centre the masthead lines if your design calls for it: Home > Center, or Ctrl+E.
Leave the masthead as one column. You will put the articles into columns in the next step.
Step 2: Put the articles into columns
- Select everything from the first article heading to the end of the last article.
- Select Layout > Columns and choose Two or Three.
Word inserts a continuous section break before the selection, so the masthead keeps the full page width, and another after it when more text follows. If the articles run to the end of the document, there is no closing break yet; Step 5 adds one. This is the method Microsoft's newsletter columns article describes for laying out part of a document: select the paragraphs, then apply columns.
Mac: the steps are the same (Layout > Columns).
Word for the web: Layout > Columns offers the preset layouts. For custom column settings and section control, open the file in the desktop app with Editing > Open in Desktop App. Section breaks are a desktop-only feature, as the Word for the web vs desktop comparison explains.
Alternative: insert the section break yourself
If you prefer to control the breaks:
- Click at the start of the first article heading.
- Select Layout > Breaks > Continuous (under Section Breaks).
- Click anywhere below that break.
- Select Layout > Columns > More Columns, choose the number of columns, and set Apply to to This section.
Microsoft's article on inserting a section break notes that a continuous break starts the new section on the same page, and that it is often used to change the number of columns.
Step 3: Adjust widths, spacing and the line between
Select Layout > Columns > More Columns while your cursor is in the column section. The Columns dialog lets you:
- choose a preset, or type the Number of columns;
- tick Line between to draw a vertical rule between columns;
- set each column's Width and Spacing under Width and spacing;
- clear Equal column width to make one column wider than the other, for a sidebar look;
- choose where the change applies in Apply to.
Microsoft's page on adjusting column widths covers widths and spacing, and the newsletter columns article covers the Line between box.
As a rule of thumb, very short lines are tiring to read. Three columns on a portrait A4 or Letter page work for short items. Two columns are a safer default for longer articles.
If you justify the text in narrow columns, large gaps can open between words. Turning on Layout > Hyphenation > Automatic lets Word split long words at line ends and evens out the spacing. Left-aligned text avoids the problem altogether.
Step 4: Control where each column starts
Text flows into the next column on its own, but sometimes you want an article to start at the top of a column. Use a column break:
- Click at the start of the heading that should move, for example just before "Dates for your diary".
- Select Layout > Breaks > Column, or press Ctrl+Shift+Enter (Mac: Cmd+Shift+Return).
Microsoft's page on inserting a column break gives the menu steps, and the shortcuts come from Microsoft's Word keyboard shortcuts list. Do not press Enter repeatedly to push the text into the next column. Those empty paragraphs shift as soon as anyone edits the text above them.
To keep a heading with the paragraph below it, click in the heading, select the small arrow at the bottom-right corner of the Paragraph group on the Home tab, open the Line and Page Breaks tab, and tick Keep with next. Built-in heading styles usually have this switched on already.
Step 5: Balance the column ends
On the last page, Word fills the first column before it starts the second. That can leave one long column and one short one. To even them up:
- Click at the very end of the last article (in the example, the end of "Dates for your diary").
- Select Layout > Breaks > Continuous.
The continuous break closes the column section, so Word shares the remaining text between the columns instead of filling the first one to the bottom of the page. If you want a full-width footer note after the articles, type it below that break and set that section to One column.
Step 6: Add pictures without breaking the columns
Pictures in narrow columns behave best when they stay in line with text or use simple wrapping.
- Click where the picture belongs and choose Insert > Pictures.
- Resize it to the column width by dragging a corner handle, which keeps the proportions.
- Write alt text: right-click the picture and choose View Alt Text (or Picture Format > Alt Text). For purely decorative lines or shapes, tick Decorative instead. Microsoft's guide to adding alternative text covers both.
The lesson on picture size, proportions and wrapping covers wrapping options. The lesson on writing useful alt text covers the description.
Keep a column layout accessible
Columns are a visual layout: Word keeps the text of a column section in one continuous flow, from the end of the first column into the second. Layouts faked with tables or floating text boxes do not have that single flow, which is why accessibility guidance favours real structure. The lesson on structure for assistive technology explains the reasoning. Keep it simple:
- Use Word's columns, not a table with invisible borders, for flowing articles.
- Avoid putting articles in floating text boxes. They can be read out of order.
- Keep real headings so readers can jump between articles.
- Run Review > Check Accessibility before sharing.
The accessible Word document checklist covers each check in more detail.
Common column problems and fixes
| Problem | Cause | Fix |
|---|---|---|
| The whole document went into columns | Nothing was selected, and the document has one section | Undo, select only the articles, then apply columns. |
| The masthead is split into columns | The section break is in the wrong place | Show formatting marks, move or delete the break, and set the masthead section to One. |
| An article starts at the bottom of a column | No column break, or blank paragraphs used to push it | Delete blank paragraphs and insert Layout > Breaks > Column. |
| The last page has one long column | The column section has no closing break | Insert a continuous section break after the last paragraph. |
| You want to go back to one column | The column setting is still on that section | Click in the section, choose Layout > Columns > One, then delete the section breaks you no longer need. |
| Deleting a break changed the layout above it | When you delete a section break, Microsoft says the combined section uses the formatting of the section that followed the break (section break article) | Undo. Set the section below the break to the layout you want, then delete the break. |
Save and share the newsletter
Print a test page or check File > Print preview, because column endings move when fonts or margins change. If you share the newsletter digitally, save a PDF that keeps headings and links. The guide on saving a Word document as a PDF covers the settings.
Practise newsletter columns
Columns are easiest to learn on a real file. The Pro exercise Set a two-column newsletter section checks your section breaks and column settings automatically. The free exercise Justify the body paragraphs of a newsletter practises the justified-text finish. For a full walk-through of breaks and layout, see the module on page setup, breaks, sections and columns.
About this guide
This guide was written by Guccibase for mswordexercises.com, a site for practising Microsoft Word on real documents. The steps follow Microsoft's own support documentation for Microsoft 365, checked on 5 November 2026. If a menu or option has changed, the help page lists ways to tell us.
Related posts
Written by Guccibase; see how these guides are written. Word Exercises is independent and not affiliated with Microsoft. Menu names follow Microsoft 365 as of 2026.