Skip to content

How to Start Page Numbers on Page 2 or Page 3 in Word

By · · 8 min read

Illustration of three Word pages where only the third page shows a page number, 1

To start page numbers on page 2 in Word, turn on Different First Page so the cover has no number, then set the numbering to start at 0 so the second page shows 1. To start on page 3, after a cover and a contents page, you need a section break before page 3, a footer that is no longer linked to the previous section, and a page number format that starts at 1.

Both come up in reports, theses and job applications, and both go wrong in predictable ways. This guide gives the exact steps for Microsoft 365 Word on Windows, notes where Word for Mac and Word for the web differ, and lists the fixes for the usual problems.

Key Takeaways

  • Numbering from page 2: select Different First Page, then Page Number > Format Page Numbers and set Start at to 0. No section break needed.
  • Numbering from page 3 (or later): insert Layout > Breaks > Next Page before that page, turn off Link to Previous in its footer, and set Start at to 1.
  • Delete the numbers in the first section afterwards; deleting one removes them from that whole section.
  • Word for the web can hide the number on the first page, but cannot start numbering later in the document. Use the desktop app.
  • For "Page X of Y" that ignores the front pages, use the SECTIONPAGES field instead of NUMPAGES.

Which method do you need?

Two ways to start page numbering laterNumber from page 2: Different First Page + Start at 0Cover12Number from page 3: Next Page section break + unlink + Start at 1CoverContentssection break12
One unnumbered page needs no section break. Two or more unnumbered pages do.
Feature Method 1: Different First Page Method 2: Section break
Unnumbered pages The first page only Any number of front pages
Section break needed No Yes, Next Page (or Odd Page)
Link to Previous Not involved Turn it off in section 2
Start at value 0, so page 2 shows 1 1, in section 2
Word for the web Can hide the first number Not supported; use the desktop app
  • Only the cover page should be unnumbered → Method 1, Different First Page. It is quicker and leaves the document as a single section. (A built-in design from Insert > Cover Page already shows no number; see how to make a cover page in Word.)
  • The cover and one or more following pages should be unnumbered, for example a cover plus a table of contents → Method 2, a section break.
  • The front pages should have their own numbers (i, ii, iii) and the body should restart at 1 → Method 2 with a different number format, covered near the end.

Both methods assume the page numbers already exist. If not, add them first with Insert > Page Number, choose Bottom of Page and a style. The page number is a PAGE field, so it updates itself as pages move; never type page numbers by hand. The free exercise Replace a typed page number with a PAGE field practises that fix.

Method 1: Start numbering on page 2 (cover page only)

Microsoft's article on starting page numbering later in your document gives these steps for Windows:

  1. Go to Insert > Header or Footer > Edit Header (or Edit Footer). You can also double-click in the footer area.
  2. On the Header & Footer tab, select Different First Page.
  3. The first page now has its own First Page Footer. If a page number is still showing there, select it and delete it.
  4. To make the second page show 1 instead of 2, select Page Number > Format Page Numbers, and under Page numbering set Start at to 0. Select OK.
  5. Select Close Header and Footer or press Esc.

Setting Start at to 0 is what turns the cover into "page 0", so the next page becomes page 1. Skip step 4 if you are happy for the second page to show 2.

Word for Mac: steps 1 to 3 and 5 are the same. For step 4, select Page Number > Format Page Numbers on the Header & Footer tab.

Word for the web: go to Insert > Header & Footer, then select the Different First Page check box. Word hides the page number on the first page automatically. Microsoft does not list a way to change the starting number in Word for the web, so the second page will still show 2.

Method 2: Start numbering on page 3 (or any later page)

When more than one page must stay unnumbered, Different First Page is not enough, because it only affects the first page of a section. The answer is to make the numbered part a new section. Microsoft documents this in Start page numbering on page 3:

  1. Show formatting marks with Home > Show/Hide ¶ (Ctrl+Shift+8 in Microsoft's shortcut list). It makes the break easy to see.
  2. Click at the very start of the page that should be page 1, before the first character of its heading.
  3. Insert a section break: Layout > Breaks > Next Page. Do not use the plain Page break; Microsoft warns that adding it here creates a blank page, and a page break does not start a new section.
  4. Double-click the footer of the new section (the page that should be page 1). The footer label now reads Footer -Section 2-.
  5. Turn off Link to Previous on the Header & Footer tab. Do this in the footer if your numbers are in the footer, or in the header if they are in the header; the two are linked separately.
  6. If the section has no page number yet, select Page Number and choose a position and style.
  7. Select Page Number > Format Page Numbers, choose Start at, type 1, and select OK. Without this step, Word keeps counting from the real page number and the page shows 3.
  8. Remove the numbers from section 1: scroll up to the cover or contents page, select the page number in its footer and press Delete. Because section 2's footer is no longer linked to section 1, this removes the numbers from section 1 only.
  9. Select Close Header and Footer or press Esc.

Check each page once. Pages 1 and 2 should be blank in the footer, page 3 should show 1, and the numbers should run on from there.

Word for Mac: the same steps work. Use Layout > Breaks > Next Page, then unlink and format as above.

Word for the web: Microsoft states that you cannot start numbering later in a document in Word for the web. Select Open in Word, make the change in the desktop app and save.

Section breaks do more than fix numbering: they also let each part of the document have its own header, orientation and margins. Section breaks in Word explains the four break types and how to delete one safely.

Printing double-sided?

If the document will be printed on both sides, the first numbered page usually needs to fall on a right-hand (odd) page. Choose Layout > Breaks > Odd Page instead of Next Page in step 3. Microsoft's guide to section break types explains that an Odd Page break starts the new section on the next odd-numbered page; for example, a break at the end of page 3 starts the new section on page 5.

Roman numerals for the front pages, 1, 2, 3 for the body

Many theses and formal reports number the front matter i, ii, iii and the body 1, 2, 3. Follow Method 2 up to step 5, then:

  1. Click in the footer of section 1 and select Page Number > Format Page Numbers. Under Number format, choose i, ii, iii and select OK.
  2. Click in the footer of section 2, open Format Page Numbers again, choose 1, 2, 3 under Number format, set Start at to 1, and select OK.

If the cover itself should have no number, select Different First Page in section 1. Microsoft's article on different page numbers in different sections adds one warning: make sure Different First Page is not selected in section 2, or the first body page will lose its number.

"Page X of Y" that ignores the front pages

A footer that says "Page 1 of 12" uses two fields: PAGE for the current number and NUMPAGES for the total. NUMPAGES counts every page in the file, including the cover and contents, so a 12-page document with two front pages shows "Page 10 of 12" on its last page.

To count only the pages in the current section, replace NUMPAGES with SECTIONPAGES. Click where the total should go and choose Insert > Quick Parts > Field, then pick SectionPages. Microsoft's reference for the SectionPages field notes that you should restart numbering at 1 in each section after the first, which Method 2 already does. To build a standard Page X of Y footer first, try the free exercise Build a "Page X of Y" footer.

Troubleshooting page numbers that will not behave

Most fixes come back to the steps in Microsoft's page 3 numbering article:

  • Page 3 shows 3, not 1. Start at was not set. Open Format Page Numbers in section 2 and set it to 1.
  • Deleting the cover's number removed every number. Link to Previous was still on. Undo with Ctrl+Z, unlink section 2, then delete again in section 1.
  • Link to Previous is greyed out. You are in section 1, or there is no section break. Show formatting marks and check for a Section Break (Next Page) line.
  • An extra blank page appeared. A page break and a section break are sitting next to each other. Delete the page break.
  • The first page of section 2 has no number. Different First Page is selected in section 2. Clear it.
  • The table of contents still shows the old page numbers. Update it with References > Update Table > Update page numbers only (Microsoft's update steps). The automatic table of contents guide explains both update options.

Practise page numbering

Page numbers are fields, and fields are easiest to understand by fixing a document that uses them wrongly. Read the lesson on page numbers with PAGE and NUMPAGES fields, work through the headers, footers and page fields module, and try the free exercises linked above. For everything else that lives in the header and footer, see Headers and footers in Word: a practical guide.

These steps were checked against Microsoft Support documentation for Microsoft 365 Word on 5 November 2026.

Related posts

Written by Guccibase; see how these guides are written. Word Exercises is independent and not affiliated with Microsoft. Menu names follow Microsoft 365 as of 2026.